Featured Products

KW Suspension H.A.S. Coilover System + Rear Adjustable Lowering Links for CLS63 and E63

The KW H.A.S. Coilover system with our Rear Adjustable Lowering Links are now in stock.

2011+ Mercedes Benz E63 and CLS63 – KW part #25325044 MSRP $1,029.99 – email or call for special pricing.

The two main benefits of our version of the kit are 1) Fully adjustable front and rear ride height as opposed to the set rear ride height of the non-adjustable KW rear links. We noticed the KW rear links sometimes do not get you the ride height you desire. 2) Our links allow for full ride height adjustment with no modifications to the vehicle other than simply replacing the fixed links with our adjustable links. At any point the car can be returned to stock height by swapping in the stock links. We did confirm fitment for the E63. The rear adjustable links are needed as the KW links included with the KW kit alone set the ride height too low for the E63. This kit is the perfect solution for front and rear ride height adjustment.


Air Ride Adjustable Lowering Links

Our links use steel hardware and are fully Zinc platted for corrosion resistance and come with rubber seals to keep dirt and road grime from getting into the ball joints. They are fully adjustable so that any ride height is achievable for that perfect stance. This also makes matching left and right heights possible. Since our links don’t require any permanent modifications to the car, the installation is fully reversible, allowing the owner to reinstall the factory links at any time. We are a local US based seller, fast shipping, actual brick and motor store with real experience installing and developing these parts, detailed photo instructions included and we are always just a phone call away if needed.

* For vehicles equipped with air ride suspension – Mercedes Benz, BMW, Porsche, Audi, Bentley, Jeep, Range Rover and Volkswagen applications

Example Photo – actual applications may differ


Vossen CV4 – CV5 – CV7

Now available – Vossen’s new additions to the deep concave lineup –


Avant Garde Forged Wheels

17″ to 22″ in mono-forged and in several multi-piece configurations.
– All designs/diameters surpass DOT/SAE J2530 parameters.
– CAD / Finite Element Analysis derived wheel designs.
– Lightening pockets standard on all series.
– Torque mounting pad ring standard on all series.
– High quality Bimecc hardware used for all series.
– (US patent #7,228,629) Triangle rim components.
– Lifetime structural warranty on all center discs.
– Titanium assembly hardware standard on function series.
– Compression residual stress technology standard on function series.
– Vehicle specific/load rating specific design variations.
– Over 40 years combined experience in the aftermarket wheel industry.


Concept One CSM-7 Matte Silver Machined Executive Edition

CSM-7 Matte Silver Machined Executive Edition!
Concave CSM-7 Matte Silver Machined
AVAILABLE SIZES: 20×9 | 20×10.5
BOLT PATTERNS: 5×120 | 5×112 | 5×114.3


Custom Vinyl Appliations now at Advance Performance

We now offer Custom digital print vinyl designs and installation
Call us for a price quote
Cars, trucks, bike’s or anything that you might want to wrap!!


Rohana Luxury high performance wheels

Rohana Wheels now available at Advance Performance


NEW MIRO 368 (BBS LM) 18″ for VW and Japanese cars

Priced at
$899.00 for the SET.

VW Fitment
18×8.5 5×100 ET30 CB57.1 Silver/Polish Lip
18×10 5×100 ET25 CB57.1 Silver/Polish Lip

5×114.3 For Japanese Vehicles
18×8.5 5×114.3 ET18 CB73.1 Silver/Polish Lip
18×10 5×114.3 ET18 CB73.1 Silver/Polish Lip


NEW Forgestar CF10 lightweight wheel

Custom made 20″ lightweight wheel.


New Stance VIP Evolution Wheels

New Stance wheel
Stance Evolution Mesh Concave
sizes: 19×8.5 / 19×9.5 / 20×8.5 / 20×10.0 / 22×9.0 / 22×9.5 /22×10.5